IXL RA2
Chemistry
|
Volatiles
|
Miscellaneous
- Family: Clay Other
- Region: None
- Mined At: Unspecified
- Raw Mineral: No
- Generic: No
Notes
A very plastic ball clay of fairly high coal content. This material has some iron stone concretion material in it and thus it does contribute to some iron blossoms in cone 10R if not ground fine. RA2 has some soluble salts that produce a brownish surface coloration in reduction firing.
RA2 is similar to most commercial ball clays except that it has a higher iron content and it does not deflocculate well for use in casting slips due to the solubles content.
RA2 fires to a yellow to grey buff in oxidation and reduction.
Fired
Shr Porosity
------------------------
Cone 7 6.9 3.4
Cone 9 7.3 2.5
Cone 11 7.2 2.0
Suppliers
- IXL
Authors
- Tony Hansen (Owner)
XML
<?xml version="1.0" encoding="UTF-8"?>
<material name="IXL RA2" descrip="" generic="0" rawmineral="0" searchkey="" loi="10.94">
<families>
<family name="Clay Other"/>
</families>
<oxides>
<oxide symbol="CaO" name="Calcium Oxide, Calcia" status="" percent="0.290" tolerance=""/>
<oxide symbol="MgO" name="Magnesium Oxide, Magnesia" status="" percent="0.460" tolerance=""/>
<oxide symbol="K2O" name="Potassium Oxide" status="" percent="0.490" tolerance=""/>
<oxide symbol="Na2O" name="Sodium Oxide, Soda" status="" percent="0.200" tolerance=""/>
<oxide symbol="TiO2" name="Titanium Dioxide, Titania" status="" percent="0.780" tolerance=""/>
<oxide symbol="Al2O3" name="Aluminum Oxide, Alumina" status="" percent="21.830" tolerance=""/>
<oxide symbol="SiO2" name="Silicon Dioxide, Silica" status="" percent="64.300" tolerance=""/>
<oxide symbol="Fe2O3" name="Iron Oxide, Ferric Oxide" status="" percent="1.490" tolerance=""/>
</oxides>
<volatiles>
<volatile symbol="" name="" percent="10.940" tolerance=""/>
</volatiles>
<suppliers>
<supplier name="IXL" country="CA" url="www.ixlbrick.com" label=""/>
</suppliers>
<notes>
<note>A very plastic ball clay of fairly high coal content. This material has some iron stone concretion material in it and thus it does contribute to some iron blossoms in cone 10R if not ground fine. RA2 has some soluble salts that produce a brownish surface coloration in reduction firing.
RA2 is similar to most commercial ball clays except that it has a higher iron content and it does not deflocculate well for use in casting slips due to the solubles content.
RA2 fires to a yellow to grey buff in oxidation and reduction.
Fired
Shr Porosity
------------------------
Cone 7 6.9 3.4
Cone 9 7.3 2.5
Cone 11 7.2 2.0
</note>
</notes>
</material>
Much more information with complete interlinking to many related Copyright 2003 http://digitalfire.com, All Rights Reserved Please support http://ceramicmaterials.info to improve this library | ![]() |
INSIGHT is ceramic chemistry |


