Ultrafiber 55
WOLLASTONITE
Chemistry
|
Volatiles
|
Miscellaneous
- Family: Aggregate
- Region: None
- Mined At: Unspecified
- Raw Mineral: No
- Generic: No
Notes
This is a coarser grade of needle-shaped crystal wollastonite that acts in a manner similar to fiber additions.
Adding 3-5% will reduce dry and firing shrinkage and improve impact resistance.
Screens to 60 mesh or coarser will accomodate re-screening. 1% retention of 100 mesh is normal.
Best to add to finished slip during gentle paddle mixing.
Polyacrylate thickeners might interfere with efficiency.
Effects on firing are minimal enough that Nyco recommends post additions.
Morphology: Acicular
Specific Gravity: 2.9
Refractive Index: 1.63
pH (19% slurry): 9.9
Water Solubility (g/100cc): 0.0095
Density (lbs/solid gallons): 24.2
Bulking value (gal/lbs): 0.0413
Mohs hardness: 4.5
Coefficient of expansion (mm/mm/C): 6.5 x 10-6
Median particle size (microns): 45
Minus 100 mesh (%): 97
Moisture (%): 0.01
Data
- Melting Point (MP): 1540 C
- Melting Point (MP): 1540 C
Suppliers
- Generic
Authors
- Tony Hansen (Owner)
XML
<?xml version="1.0" encoding="UTF-8"?>
<material name="Ultrafiber 55" descrip="WOLLASTONITE" generic="0" rawmineral="0" searchkey="" loi="0.00">
<families>
<family name="Aggregate"/>
</families>
<oxides>
<oxide symbol="CaO" name="Calcium Oxide, Calcia" status="" percent="47.500" tolerance=""/>
<oxide symbol="MgO" name="Magnesium Oxide, Magnesia" status="" percent="0.100" tolerance=""/>
<oxide symbol="TiO2" name="Titanium Dioxide, Titania" status="" percent="0.020" tolerance=""/>
<oxide symbol="Al2O3" name="Aluminum Oxide, Alumina" status="" percent="0.200" tolerance=""/>
<oxide symbol="SiO2" name="Silicon Dioxide, Silica" status="" percent="51.000" tolerance=""/>
<oxide symbol="Fe2O3" name="Iron Oxide, Ferric Oxide" status="" percent="0.400" tolerance=""/>
<oxide symbol="MnO" name="Manganous Oxide" status="" percent="0.100" tolerance=""/>
</oxides>
<volatiles>
<volatile symbol="" name="" percent="0.680" tolerance=""/>
</volatiles>
<suppliers>
<supplier name="Generic" country="" url="" label=""/>
</suppliers>
<notes>
<note>This is a coarser grade of needle-shaped crystal wollastonite that acts in a manner similar to fiber additions.
Adding 3-5% will reduce dry and firing shrinkage and improve impact resistance.
Screens to 60 mesh or coarser will accomodate re-screening. 1% retention of 100 mesh is normal.
Best to add to finished slip during gentle paddle mixing.
Polyacrylate thickeners might interfere with efficiency.
Effects on firing are minimal enough that Nyco recommends post additions.
Morphology: Acicular
Specific Gravity: 2.9
Refractive Index: 1.63
pH (19% slurry): 9.9
Water Solubility (g/100cc): 0.0095
Density (lbs/solid gallons): 24.2
Bulking value (gal/lbs): 0.0413
Mohs hardness: 4.5
Coefficient of expansion (mm/mm/C): 6.5 x 10-6
Median particle size (microns): 45
Minus 100 mesh (%): 97
Moisture (%): 0.01</note>
</notes>
<testdata>
<testitem testname="0" value="1540 C"/>
<testitem testname="0" value="1540 C"/>
</testdata>
</material>
Much more information with complete interlinking to many related Copyright 2003 http://digitalfire.com, All Rights Reserved Please support http://ceramicmaterials.info to improve this library |  |
INSIGHT is ceramic chemistry |