C-1 Clay
Plastic, White, Wall Tile
Chemistry
|
Volatiles
|
Hazards
- Quartz, Crystalline Silica
Miscellaneous
- Family: Clay Other
- Region: None
- Mined At: Unspecified
- Raw Mineral: No
- Generic: No
Notes
As of Mar 94 C-1's future availability is in question because a gold mining company holds the lease to the quarry and wants to fill it in with overburden from the gold diggings. However the company now assures its customers that this material will still be available.
C-1 clay is a unique, plastic clay with unusually high dry strength, low firing shrinkage and excellent pressing properties. It has superb plastic properties for a wide variety of applications. It is obtained from a large deposit of hydrothermally altered rhyolitic material located in the Mojave Desert of Southern California. It is an ideal material in combination with talc for the production of ceramic wall tile. The unusual plastic properties of C-1 Clay make it suitable for the manufacture of pottery and other ceramic ware by the plastic forming process. Careful selection of materials during mining and the use of a large blended stockpile assure uniformity of composition and quality.
C1 clay and PV clay as reasonably similar in properties. However, PV clay is whiter and does not have the microfine speck sometimes seen in C1. In addition it is not as plastic and will need to be augmented by a white-firing bentonite.
Specific Gravity: 2.7
Apparent Density: 50 lb/cu ft
Tapped Density: 62 lb/cu ft
200 Mesh retained: 6.0%
Particle shape: Granular
Dry Brightness: 70
pH Value: 8.5
PSD:
94% passing 40 microns
86% 30 microns
74% 20
66% 15
59% 10
54% 7.5
48% 5
45% 4
43% 3
38% 2
31% 1
Thermal Expansion: 300C-0.142 - 5.07 x 10-6 in/in/C (20-300C)
650C-0.462 - 7.33 x 10-6 in/in/C (20-650C)
Suppliers
- BFM Minerals
Authors
- Tony Hansen (Owner)
XML
<?xml version="1.0" encoding="UTF-8"?>
<material name="C-1 Clay" descrip="Plastic, White, Wall Tile" generic="0" rawmineral="0" searchkey="C1 Clay" loi="0.00">
<families>
<family name="Clay Other"/>
</families>
<oxides>
<oxide symbol="CaO" name="Calcium Oxide, Calcia" status="" percent="1.320" tolerance=""/>
<oxide symbol="MgO" name="Magnesium Oxide, Magnesia" status="" percent="0.510" tolerance=""/>
<oxide symbol="K2O" name="Potassium Oxide" status="" percent="1.730" tolerance=""/>
<oxide symbol="Na2O" name="Sodium Oxide, Soda" status="" percent="0.200" tolerance=""/>
<oxide symbol="Al2O3" name="Aluminum Oxide, Alumina" status="" percent="15.090" tolerance=""/>
<oxide symbol="SiO2" name="Silicon Dioxide, Silica" status="" percent="74.430" tolerance=""/>
<oxide symbol="Fe2O3" name="Iron Oxide, Ferric Oxide" status="" percent="0.410" tolerance=""/>
</oxides>
<volatiles>
<volatile symbol="" name="" percent="6.300" tolerance=""/>
</volatiles>
<hazards>
<hazard name="Quartz, Crystalline Silica"/>
</hazards>
<suppliers>
<supplier name="BFM Minerals" country="CA" url="www.mbendi.co.za/orgs/cnvj.htm" label=""/>
</suppliers>
<notes>
<note>As of Mar 94 C-1\'s future availability is in question because a gold mining company holds the lease to the quarry and wants to fill it in with overburden from the gold diggings. However the company now assures its customers that this material will still be available.
C-1 clay is a unique, plastic clay with unusually high dry strength, low firing shrinkage and excellent pressing properties. It has superb plastic properties for a wide variety of applications. It is obtained from a large deposit of hydrothermally altered rhyolitic material located in the Mojave Desert of Southern California. It is an ideal material in combination with talc for the production of ceramic wall tile. The unusual plastic properties of C-1 Clay make it suitable for the manufacture of pottery and other ceramic ware by the plastic forming process. Careful selection of materials during mining and the use of a large blended stockpile assure uniformity of composition and quality.
C1 clay and PV clay as reasonably similar in properties. However, PV clay is whiter and does not have the microfine speck sometimes seen in C1. In addition it is not as plastic and will need to be augmented by a white-firing bentonite.
Specific Gravity: 2.7
Apparent Density: 50 lb/cu ft
Tapped Density: 62 lb/cu ft
200 Mesh retained: 6.0%
Particle shape: Granular
Dry Brightness: 70
pH Value: 8.5
PSD:
94% passing 40 microns
86% 30 microns
74% 20
66% 15
59% 10
54% 7.5
48% 5
45% 4
43% 3
38% 2
31% 1
Thermal Expansion: 300C-0.142 - 5.07 x 10-6 in/in/C (20-300C)
650C-0.462 - 7.33 x 10-6 in/in/C (20-650C)</note>
</notes>
</material>
Much more information with complete interlinking to many related Copyright 2003 http://digitalfire.com, All Rights Reserved Please support http://ceramicmaterials.info to improve this library |  |
INSIGHT is ceramic chemistry |