A B C D E F G J K L M N O P R S T U V W All
Words beginning with L
Leaching, glaze solubility
Glazes are not as inert and stable as most people think. All are slightly soluble and will thus leach into liquids they come into contact with. However some glazes are dramatically more soluble than others and lead glazes have gained this reputation. The subject of leaching and glaze safety is a complex one and ceramic calculations and chemistry can be used to great benefit in this area. The Magic of Fire book has much information on this subject.Lead solubility, lead release in glazes
Lead release in glazed ware is a critical thing to consider if you make ware at low temperatures and employ lead based materials. The entire ceramic industry has been forced to progressively move away from leaded glazes and colors over the past decade. It is important to realize that using lead frits does not make lead glazes safe, it just makes handling lead glazes safer. The solubility of the fired glaze is dependent on its chemistry and the way it is fired. If you do not know that formula for a frit you are using, check it out, do not assume it is lead free.
Lead release is normally tested by measuring how much of the glaze will dissolve in a dilute acid mixture.
Testing kits are available for $25 and come with a neutralizer (sodium hydrate) and an indicator (sodium sulfuret). Both have warnings about flushing skin or eyes thoroughly with water if splashed on and drinking 3 or 4 glasses of water or milk if ingested (do not induce vomiting).
One set of instructions, for example, says to wash the object, immerse in white distilled vinegar (5% acetic acid - any vinegar will do) for 18 hours (or longer), stir the vinegar, fill the supplied test tube to the etched line (about 2 cc), add 7 drops of neutralizer, invert to mix. After 2 minutes, add 7 drops of indicator and invert to mix. After 2 minutes a clear or milky solution is OK, any shade of brown indicates lead according the comparison chart provided.
Lab testing can be done at Elemental Research Lab, 309-267 West Esplanade, North Vancouver, B.C. Canada V7M 1A5 604-985-0445 (they test many metals). Also at Kirby Health Center Lab, 71 North Franklin Street, Wilkes-Barre, PA 18701 717-822-4278.Loi
The amount of weight a material loses on firing. LOI is usually crystal bound water or carbon material that burns away.Lustre Colors
Common materials used in lustres are stannous chloride, barium chloride, barium chloride, sodium chloride, bismuth subnitrate, silver, gold, and platinum. We do not provide a definition here however you can look for these books:
Ceramic Colours and Pottery Decoration by Kenneth Shaw, published by Maclaren and Sons Ltd., London, 1962, reissued 1968.
Lustres by Margery Clinton, published by BT Basford Ltd. London, 1991. This book covers how to make and use lustres.Lustres, lusters
Lustres are very thin coatings of metallic substances fired at comparatively low temperatures onto an already fired glaze surface. They produce iridescent effects.
Much more information with complete interlinking to many related Copyright 2003 http://digitalfire.com, All Rights Reserved Please support http://ceramicmaterials.info to improve this library |  |
INSIGHT is ceramic chemistry |